Quick answer
2–3Ah for a drill/driver, 5Ah for general use, 6–9Ah (or FlexVolt) for saws and impact wrenches. Bigger packs run longer and deliver more power, but weigh more.
Two numbers matter on a tool battery label: volts (V) and amp-hours (Ah). Volts are set by your platform (DeWalt 20V MAX, Milwaukee M18, Makita 18V LXT). Amp-hours are where you actually get to choose.
What is an amp-hour?
Amp-hours measure a battery's capacity, like the size of a fuel tank. For the same tool doing the same work, a 5Ah pack runs about two and a half times longer than a 2Ah pack.
To compare batteries with different voltages, look at watt-hours (Wh) instead: multiply volts by amp-hours.
- 18V pack, 5Ah: 18 × 5 = 90 Wh
- 12V pack, 6Ah: 12 × 6 = 72 Wh
More watt-hours means more stored energy.
Bigger isn't always better
Large packs have three downsides:
- Weight. A 9Ah pack can weigh more than twice as much as a 2Ah. On a drill held overhead all day, you'll feel it.
- Price. Cost climbs quickly with capacity.
- Charge time. Bigger packs spend longer on the charger.
But bigger packs also have a lesser-known upside: they deliver more power in demanding tools, because more cells share the load. A circular saw cuts harder and runs cooler on a 6Ah pack than on a 2Ah.
Which battery for which tool?
| Tool | Recommended size | Why |
|---|---|---|
| Compact drill/driver | 2 to 3Ah | Light, good for overhead work |
| Impact driver | 2 to 5Ah | 5Ah for long days |
| Hammer drill (concrete) | 5Ah | Sustained load |
| Impact wrench, grinder | 5 to 8Ah | High current draw |
| Circular saw, mitre saw | 6 to 9Ah (or FlexVolt) | Power and runtime |
| Blower, chainsaw | 8 to 12Ah | Very high consumption |
The best starter setup
For most people, the winning combination is:
- one compact pack (2 to 3Ah) for light tools;
- one large pack (5 to 6Ah) for tools that work hard.
With two packs, one is always charging while the other works. In winter, it also lets you keep a spare warm (see our cold-weather battery guide).
FlexVolt, HIGH OUTPUT, FORGE: the "pro" lines
Each brand has premium packs for its hungriest tools:
- DeWalt FlexVolt: 20V/60V packs that work in every 20V MAX tool and deliver 60V in FlexVolt tools. A 9Ah FlexVolt gives 9Ah at 20V or 3Ah at 60V.
- Milwaukee HIGH OUTPUT and FORGE: higher-performance cells for more power and less heat in demanding M18 tools.
- Makita 18V LXT 5Ah and up: the 5Ah is Makita's go-to pack, with fast charging on Makita's rapid charger.
If you mostly drive screws and drill holes, these packs are often more than you need. For a saw or an impact wrench, they're worth it.
Beware of knock-offs
Some marketplaces sell very cheap "compatible" batteries. They don't always have the same safety electronics as genuine packs, and their real capacity is often well below the label. For a battery you'll hold for hours, buy genuine, new and sealed.
To see what these sizes cost in Canada, check our Canadian battery price comparison.
FAQ
Is a 5Ah battery more powerful than a 2Ah?
It runs longer, and it also delivers more current in demanding tools. In a saw or grinder, you'll feel the extra power.
What size battery for a drill/driver?
A 2 to 3Ah pack is enough for most jobs. It keeps the tool light and balanced.
What's the difference between Ah and Wh?
Ah measures capacity at a given voltage. Wh (volts × Ah) measures total energy and lets you compare packs of different voltages.
Prices are recorded on a specific date and can change.